SaniHEATDomestic Hot Water Sizingve. 1.0.0
X - Engineering TOOLS
xengtools2026@outlook.com
EQUIPMENT
L
kW
°C
kW
Tank volume: For bivalent systems or middle-coil tanks, input only the heated/effective water volume (above the lower edge of the coil/upper coil) as the effective capacity.
Heat exchanger: Power of heat exchanger should be greater (or at least equal to) than the power of the heat generator.
L
kW
—kW
TEMPERATURES
°C
°C
°C
°C
Needs & Supply curves
Results
Results per minute| Metric | Value | Unit |
|---|---|---|
| Maximum storage capacity (Qsto;max) | — | kWh |
| Minimum storage capacity (Qsto;min) | — | kWh |
| Switch-ON point (Qsto;on) | — | kWh |
| Heat losses of the storage tank (QW;sto;t) | — | kWh/min |
| Distribution heat losses (QW;dis;t) | 0.00000 | kWh/min |
Power needed for direct flow systems Make sure to input draw-off data. | — | kW |
| Number of starts of the heat generator | 0 | starts/day |
| Time the heat generator is ON | 0 / 0.00 | min / h |
Set tank internal height and sensor height (Advanced) to compute Qsto;min.